Language
Dryers are devices used to remove moisture from wet materials and are widely used in the chemical, food, and pharmaceutical industries. However, during use, dryers may also experience some common failures. This article will introduce some common dryer failures and solutions.
1. Poor drying effect
Cause: This may be caused by too long drying time or too high drying temperature.
Solution: You can try to reduce the drying time or lower the drying temperature.
2. Internal wear of the machine
Cause: This may be caused by long-term high-speed operation of the dryer accessories, resulting in severe wear.
Solution: Regularly inspect the inside of the machine and replace severely worn parts.
3. Air leakage in the machine
Cause: This may be caused by poor machine sealing or broken pipes.
Solution: Check whether the machine seals and pipes are intact, and replace them in time if damaged.
4. Motor failure
Cause: This may be caused by overheating of the motor or damage to the internal parts of the motor.
Solution: Stop using the dryer and let the motor cool before using it. If the dryer accessories are damaged, the motor needs to be replaced.
5. The dryer cannot start
Reason: This may be caused by a power failure or a control system failure.
Solution: Check whether the power supply and control system are normal. If there is a problem, it needs to be repaired in time.
6. Exhaust gas pollutes the environment
Reason: This may be caused by excessive harmful substances in the exhaust gas of the dryer.
Solution: Check the composition of the exhaust gas of the dryer. If there are excessive substances, they need to be dealt with in time. At the same time, the dryer needs to be inspected and maintained regularly to ensure its normal operation.
In short, the dryer will have various problems during use, but as long as we understand the causes and treatment methods of common faults, we can solve the problems in time and ensure the normal operation of the dryer.
